Your Address : Globalchemmade--Anhui Kingcham Chemical Technology Co.,Ltd.
Name:Anhui Kingcham Chemical Technology Co.,Ltd.
Type:Others
Tel:86-551-63830671
Fax:86-551-63830871
Email:zhangy@kingcham.com
Web:www.kingcham.com
Address:China(Mainland)
Products detail
| Product Name: | Interior Matting Agent M-10 |
|
| CAS No: | No | |
| Product Type: | Coatings and Paints -> Coating | |
| Product spec: | matting agent for powder coating | |
| Packing: | 25kgs per bag | |
| Post Time: | 2015-01-09 | |
| Usage: | The usage of M-10 is 1-3.1% of the total amount for powder coating formulations, it suitable for 5%@60 degrees above gloss, the more of the usage, the gloss will be lower. | |
| Description: | Interior Matting agent M-10 M-10 is a kind of chemical matting agent without wax, which mainly suitable for polyester / epoxy hybrid powder coating system. The characteristic of M-10 is it can offer the good mechanical property, excellent leveling property, perfect anti-yellowing property and the clear coating effect in the power coating. Meanwhile, the product consumption significantly reduced, compared to the similar products available on the market, it can reduce costs remarkably. 1. Technical Parameters ★Appearance: white or light yellow powder ★Bulk density :450-550 g / l ★Solid Content : 99% 2.Product application and performance ★M-10 does not react with epoxy, it is pre-mixed with other materials when you use it, it can be squeezed directly. It will have better matting effect if epoxy has a slight excess in the formulations. ★The powder paints and coatings made from the M-10 is smooth and never getting yellow ★The application range of polyester is very widely, It can match the most of the 5:5 and 6:4 polyesters in the market and provide a good matting effect. ★You can choose to add suitable accelerator / catalyst to improve impact performance, but it may cause the rise of coating surface gloss and the reduce of the leveling performance. ★The powder coatings made of the M-10 have a good storage stability. ★Recommended extrusion temperature: I District 95 ℃, II District 110 ℃; recommended curing condition: 200 ℃ * 12min or 190 ℃ * 15min. ★heavy metal contents of this product conforms to the requirment of EU RoHS standard. | |